ZETRON 360 Manuel d'instructions télécharger pdf (Page 21)

Radio Programming

6. In the FleetSync menu, General 2 menu:

a. Clear the Status Message Stack checkbox.

b. Clear the Caller ID Stack checkbox.

c. Mark the Status Message Serial Output check box.

d. Mark the Unit ID Serial Output checkbox.

e. Mark the J Command Serial Output check box.

7. The TK-x180 series has several programmable AUX I/O pins that can be

assigned input or output functions as desired. For the Zetron Model 360

application, we are concerned with two functions: External Hook Switch input

and External PTT input. These must be specifically assigned to pins 12, and 13,

respectively:

a. Navigate to the Extended Function menu, AUX tab.

b. Assign DB-25 Pin 12 as an Input with a function of External Hook

c. Assign DB-25 Pin 13 as an Input with a function of External PTT (Voice).

The custom cable provided by Zetron is pre-wired for these pin assignments.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 76 77

Pas de commentaire

ZETRON 360 Manuel d'instructions Page 21